How to Change the Oil on a Troy-Bilt Walk Behind Mower

Length of clip: 1:09
This video will show you how to change the oil on the Troy Bilt walk behind mower.  Depending on your model, the instructions in this video may vary slightly.  Always be sure to check your operator's manual for detailed instructions.


Step 1

Remove the spark plug ignition wire.

Step 2

Remove the dip stick.

Step 3

Using the Arnold Siphon Pump, place the orange tube into the dip stick hole on the engine and the black tube into the oil pan.

Step 4

Prime the pump by pumping the handle three to four times. Once the liquid begins to flow, it will flow without further pumping.

Step 5

Remove the orange tube and add new oil as instructed in your operator's manual.

Step 6

Replace the dip stick.

Step 7

Replace the spark plug ignition wire.

Step 8

Dispose of oil properly.

Print This Article

Did You Find this Helpful?