Possible Causes | ![]() | Corrective Actions |
1Bent or damaged blade, pulley, or spindle | ![]() | Replace blade, pulley, or spindle. |
Belt is damaged | ![]() | Replace belt. |
Engine mounting bolt loose or missing | ![]() | Tighten mounting bolt or replace bolt. |
Engine is running at low RPMs | ![]() | Make sure engine is at full throttle. |
Cutting deck is not adjusted properly | ![]() | Adjust deck. |
Dirt and debris built up under deck | ![]() | Clean under deck after each use. |
1-800-269-6215Mon. - Fri.: 9AM - 7PM ESTSat.: 9AM - 6PM ESTSun: 9AM - 6PM EST